Renault diagnostics

Properly diagnosing your Renault starts with the right obd scanner. At Carvitas we have the largest range of OBD readers for Renault/Dacia. Many common problems in the electronics can be detected with a specialized OBD2 scanner, any OBD2 error codes can be erased directly from the ECU / computer of your Renault.

Diagnose your Renault with iCarsoft and Autel scanners

Driving a French car is of course wonderful, the comfort is often unprecedented and there is no shortage of options in the car. As with all modern cars, the electronics sometimes fail. A prejudice is therefore that this would happen more often at Renault than at, for example, a German car brand, nothing could be further from the truth! We therefore have a wide range of OBD devices for Renault, from iCarsoft and Autel in our range.

iCarsoft RT V1.0 for Renault and Dacia

This OBD2 scanner is characterized by the specialized software for Renault and Dacia. The device can not only handle modern OBD2 compatible cars, but also older Renault models with an OBD1 connection. The scanner is very extensive and has support for almost all control devices. Reading OBD codes from your Megane, for example, is a piece of cake. Do you own a Clio? Erasing error codes on the Clio is done easily. Of course the device is not limited to the Clio and Megane, take a look at the product page for all supported Renault models.

Autel universal garage equipment

Autel has a rich history in the car diagnostics industry. The brand has proven itself time and time again as a robust partner in hobby and specialist garages. For example, the Autel Maxisys can diagnose your Renault at a high level with deep diagnosis and programming modules is also possible. If you do not need programming, the Autel MX808 is a good alternative, with the software of the Maxisys systems, a deep diagnosis can be made.

Renault CAN Clip not always necessary

The Renault Clip is the most chosen system for Renault dealers, unfortunately it is not freely available on the market. Counterfeiting is often offered with all its consequences. SeCons has come up with an answer to this, the RENcom. The RENcom is a USB OBD2 interface that read and erase error codes from your Renault at a high (similar to dealer) level. The vehicle coverage is impressive with not only OBD support for passenger vehicles, but also OBD2 diagnosis with vans is possible.

Read OBD2 error codes from your Renault

If you only want to read error codes from the engine management of your car, or reset the engine light, you can go for a universal OBD2 error code reader. These do not support CAN systems, such as ABS, airbags, etc. But they do support the full engine management of modern OBD2 cars. Before purchasing, make sure that your car is OBD2 compatible and is not equipped with an OBD1 protocol. If you want to read your car with your phone or tablet, we offer OBDLink bluetooth and USB interfaces. Diagnosis does not necessarily have to cost a lot of money, so you do not always need an OBD reader to reset or detect errors.