Installation Foxwell NT530

Below is the roadmap to install your Foxwell NT530. Please note that the Foxwell NT530 requires a Windows computer to use and install the software.

1. Download the Foxwell software here.
   
2. After downloading, extract the file (zip file) and install.
3. Launch the program and click on: Register.
4. Enter your email address and click the button: Send code.
5. You will receive a 4 digit code via email, enter it and come up with a password.
6. Click on: Free registration to complete.
7. Log in with email and password
8. Connect the NT530 to your PC. Using the arrows, select Update and press enter.
9. Click on: Activate and then Read to read the serial number.
10. Click on: Activate (next to the serial number)
11. Log out and press "Back" on the scanner.
12. Select Update on the scanner again and log in again.
13. A list of available brands will now appear, select the desired brand.
14. If you click on Downloads now, you can see if newer software is available.