10 Feedback Company
from 49 reviews

iCarsoft II series updates

The iCarsoft II series updates include the models listed below. Please note that these devices have been out of production for quite some time and are therefore no longer sold.

  • iCarsoft OPII Opel
  • iCarsoft TYTII Toyota and Lexus
  • iCarsoft VOLII Volvo and Saab
  • iCarsoft RTII Renault and Dacia
  • iCarsoft VAGII VAG (Volkswagen/Audi/Seat/Skoda)
  • iCarsoft FDII Ford
  • iCarsoft LRII Land Rover and Jaguar
  • iCarsoft FTII Fiat and Alfa Romeo
  • iCarsoft PORII Porsche
  • iCarsoft CPII PSA (Peugeot and Citroën)
  • iCarsoft MBII Mercedes and Smart
  • iCarsoft CR Plus Professional

Step 1: Download here the update software for these iCarsoft products:

Step 2: Once you have downloaded and installed the update software, you can open the program.

Step 3: Remove the memory card from the bottom of your iCarsoft device and insert it into the USB flash drive provided. Insert the USB stick into your PC. The serial number of your iCarsoft device will be automatically recognized by the software. Then click "Update" to proceed to the next step.

Step 4: Enter your email address to register your device and click "Submit".

Step 5: Then click on the component you want to update. You can choose to update the firmware and to update the diagnostic software. We recommend updating both. Click "Download" and then "Ok" to confirm.

Step 6: The updates are downloaded to the memory card. This takes about 15 minutes. When the download is successful, you will get a notification of this. Click on "Ok".

Step 7: Remove the memory card from your computer and reinsert it into your iCarsoft diagnostic device. Connect your iCarsoft to your PC via the USB data cable. Your iCarsoft's home screen will prompt you to do a "System upgrade". Click "Ok" to do this. This upgrade will take approximately 1 minute.