Foxwell NT530 Ferrari
The Foxwell NT530 for Ferrari is a diagnostic device with professional capabilities. In addition to OBD2 diagnostic functions, the NT530 can also read all other available systems in the Ferrari. Besides diagnosing, the NT530 can perform many service-related tasks, such as resetting and configuring oil and service intervals, regenerating the particulate filter, learning the throttle body, controlling actuators, clearing adaptive values, learning parts, etc. This Ferrari diagnostic device works on both older cars with OBD1 and newer cars with OBD2. Want to know if this device is suitable for your car? Check the Ferrari function list at the bottom of the page. Some Ferrari models may not be supported yet.
✓ EOBD/OBD2 engine management diagnostics
✓ OBD1 diagnostics
✓ Diagnostics of all modules
✓ Live data and Freeze Frame data display
✓ Actuator control, resetting adaptive values
✓ Programming and coding parts
✓ Service functions: oil/service reset, SAS, particulate filter, EPB, SRS
![Contact](/assets/img/contact.png)
Foxwell NT530 Ferrari Diagnostic tool
The Foxwell NT530 Ferrari diagnostic device allows you to diagnose your Ferrari at a high level. You are not limited to just diagnosing the engine with this device. The NT530 for Ferrari goes much further than that. Every available system in your Ferrari can be read, fault codes can be erased, and live sensor data can be viewed. The NT530 can be expanded with up to 4 extra modules from other car brands. This makes the NT530 very versatile. The expansion can be done at purchase or later when desired. With this flexible system, you don't have to make a large investment all at once; you can upgrade as needed. Many Ferrari models can be read with the NT530, but not all. To ensure that your Ferrari can be read with the Foxwell NT530, we refer you to the function list at the bottom of the page. This list details which system of which model can be accessed.
NT530 Ferrari Functionalities
In addition to the standard OBD2 functionality, the NT530 also has features that were previously only available in expensive diagnostic equipment and interfaces. Below is a summary of the possibilities.
- Reading generic OBD2 fault codes
- Displaying live data in almost all modules
- Reading Ferrari-specific fault codes
- Controlling actuators
- Making adjustments in the car's software
- Programming modules in different ECUs
- Support for EPB/SBC
- Learning the throttle body
- Resetting service intervals
- Resetting oil intervals
- Resetting adaptive values
- Regenerating the particulate filter
- Adjusting headlights
- Calibrating the steering angle sensor
- Learning new parts
- Learning replaced parts
- Opening and closing electronic brake calipers
Which Ferrari models are supported?
- 348 (F348)
- 355 (F355)
- 360 Modena (F131)
- 430 (F131E)
- 430 Challenge (F131E Challenge)
- 430 ELP (F131E ELP)
- 430 EV08 (F131E EV08)
- 430 Scuderia Spyder (F131E 16M)
- 456 (F456)
- 456 GT (F456 GT)
- 456 M (F456 M)
- 458 Italia (F142)
- 458 Italia Challenge (F142 CHP)
- 550 Maranello (F133)
- 575M Maranello (F133E)
- 599 GTB Fiorano (F141)
- 599 GTO (F141 GTO)
- California (F149)
- Enzo (F140)
- F12 Berlinetta (F152)
- F50 (F50)
- FF (F151)
- 458 Italia Speciale (F142 VS)
- California T (F149M)
- Mondial (Mondial)
- Scaglietti (F137)
- Scaglietti MY (F137 MY)
- Testarossa (F512 TR)
Updates
After registering the Foxwell scanner, you will receive free lifetime updates, installable via Foxwell's software.
What is included with the Foxwell NT530?
- Foxwell NT530 Plus diagnostic device
- Nylon storage case
- 150cm OBD2 cable
- USB cable to connect the device to the PC
- SD card
- Manual
Advantages & drawbacks
- EOBD/OBD2 engine management diagnosis
- OBD1 diagnosis
- Diagnosis of all modules
- Live data and Freeze Frame data display
- Control actuators, reset adaptation values
- Programming and coding parts
- Service options: oil/service reset, SAS, particulate filter, EPB, SRS
- Update via Wifi
- Basically only suitable for Ferrari vehicles. An additional brand costs 110 euros
Specs summary
- Suitable for car brand Ferrari
- Device properties Free updates, Handheld, Updates
- Features ABS, Controlling Actuators, Airbag, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Brake pad reset, DPF regeneration, Scantool, Service reset, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, K-Line, KWP-2000, OBD1, OBD2
Alternative products
![UDIAG X 50 diagnose tablet](https://assets.bucketcdn.com/cdn-cgi/image/width=300,height=300,quality=82,format=auto,fit=contain/UDIAG-X-50-diagnose-tablet.jpg)