Foxwell NT530 Volvo
The Foxwell NT530 Volvo is a scan tool with professional capabilities, at a normal price. The NT530 is equipped with the normal OBD2 diagnostic capabilities, along with the ability to read all other modules. Besides reading, the NT530 can perform many service related operations, such as resetting and setting oil and service intervals, regenerating particulate filter, learning throttle body, controlling actuators, erasing adaptation values, learning parts etc etc. This reader works on both older cars with OBD1 and the new cars with OBD2. Want to know if this device is suitable for your car? Check the Volvo function list at the bottom of the page. It is possible that the latest Volvo models are not yet supported.
✓ EOBD/OBD2 engine management diagnosis
✓ OBD1 diagnosis
✓ Diagnosis of all modules
✓ Live data and Freeze Frame data display
✓ Actuators control, adaption values reset
✓ Programming and teaching components
✓ Service capabilities: oil/service reset, SAS, particulate filter, EPB, SRS
Foxwell NT530 for Volvo
The Foxwell NT530 with professional Volvo diagnostic software, allows you to read and possibly reset the car at a high level. However, you are not limited to just the Volvo brand. The NT530 is expandable with up to 4 additional modules from other brands. Expanding can be done at the time of purchase, or later when desired. With this flexible system, you do not have to make a large investment all at once, so you can upgrade when the need arises. Many Volvo models can be read with the NT530, but not every model. To make sure your Volvo can be read with this device, please refer to the function list at the bottom of the page. It describes exactly which module of which model can be accessed.
Functionalities NT530 Volvo
In addition to the standard OBD2 functionality, the NT530 also has features on board that until now were reserved only for expensive diagnostic equipment and interfaces. Below is a summary of the capabilities.
- Reading generic OBD2 error codes
- Display live data in almost all modules
- Reading Volvo specific error codes
- Controlling actuators
- Making adjustments to the car software
- Programming modules in different ECUs
- Support for EPB/SBC
- Learn throttle body
- Service interval reset
- Reset oil interval
- Reset adaptation values
- Generate particulate filter
- Adjust headlights
- Calibration of steering angle sensor
- Teach-in of new parts
- Teach-in of replaced parts
- Opening and closing of electronic calipers
View and download function list for Volvo
In the Volvo function list (PDF) you will find all Volvo models and modules that can be read with the NT530. At the bottom of the file you will also find the special operations the device can perform on certain models. Before ordering the device, we recommend you to check carefully if the features you want are present.
Advantages & drawbacks
- EOBD/OBD2 engine management diagnosis
- OBD1 diagnosis
- Diagnosis of all modules
- Live data and Freeze Frame data display
- Controlling actuators, resetting adaptation values
- Programming and teaching parts
- Service capabilities: oil/service reset, SAS, particulate filter, EPB, SRS
- Suitable for Volvo vehicles only
- Windows computer or laptop required to install the software on the tester
Specs summary
- Suitable for car brand Volvo
- Device properties Free updates, Handheld, Updates
- Features ABS, Controlling Actuators, Airbag, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Brake pad reset, DPF regeneration, Scantool, Service reset, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, K-Line, KWP-2000, OBD1, OBD2
Reviews
Write your reviewOtherwise good, only an instruction book would be helpful.
11-08-2022Works perfectly on the Mini, but very limited on the Volvo 850. You don't actually get that from the list of Volvo models.
06-01-2021