OBDLink SX USB Interface
The OBDLink SX USB interface comes with OBDWiz diagnostic software. Through the PC or laptop a motor diagnosis can be made. With this interface you can diagnose all OBD2 compatible cars (gasoline from the year 2001 and diesel from the year 2004). This interface is also suitable when you want to view live data. This interface is also compatible with other programs, due to the backwards compatibility with the ELM327 instruction set.
Read moreOBDLink SX USB interface
This very easy to install and use USB interface is the successor to the ELM327. The OBDLink SX is many times faster in processing data than its predecessor. The included software from OBDWiz is extensive and easy to use. If you want to use other software, this is also possible. You will have to purchase this software yourself.
The interface can be used on any car with OBD2. As a rule, these are all gasoline cars from the year 2001 and all diesel cars from the year 2004.
Capabilities of the OBDLink SX
- Reads and clears error codes in engine management
- Turns off the Check Engine light (MIL)
- Reads freeze frame data
- Shows real-time data (about 90 parameters!)
- Customizable dashboards
- Emissions readiness test - Monitor fuel consumption, calculate l/100km or km/l
- Different trip meters
- Datalogs to CSV file (compatible with Excel)
- Chassis number and calibration ID retrieval
- O2 sensor results (Mode $05)
- Compile and email full diagnostic report
- Free updates
- ELM327 compatible
- Free OBDWiz software
- Works on all cars with OBD2
- And much more...
Advantages & drawbacks
- Fully EOBD/OBD2 compatible
- Live data and freeze frame display
- Can do everything that an ELM327 can also do
- Free OBDWiz software
- Also works perfectly with other software programs, such as MultiECUscan, or OBD Doctor
- Very good value for money
- OBDWiz software can only read engine management
- For other functions are third party apps required
Specs summary
- Suitable for car brand Abarth, Alfa Romeo, Aston Martin, Audi, BMW, Bentley, Chevrolet, Chrysler, Citroën, Dacia, Daihatsu, Dodge, Ferrari, Fiat, Ford EU, Ford USA, General Motors, Honda, Hyundai, Infiniti, Jaguar, Jeep, Kia, Lamborghini, Lancia, Land Rover, Lexus, Maserati, Mazda, Mercedes, Mini, Mitsubishi, Nissan, Opel, Peugeot, Porsche, Renault, Rolls-Royce, Saab, Seat, Skoda, Smart, Subaru, Suzuki, Toyota, Universal, Volkswagen, Volvo
- Device properties Free updates, Handheld, Updates, Connect to computer
- Features Erase fault codes, Freeze frame, Interface, Live data, Engine diagnostics, Engine management reset, Scantool
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, K-Line, KWP-2000, OBD2
Reviews
Write your reviewWorks smoothly and allows instant connection
13-05-2024Purchased on recommendation due to the processing speed of the cable.
22-03-2024Good interface with clear description
16-01-2024Works perfectly and quickly with Multi ECU scan.
23-08-2023Works perfectly with the multiecuscan, much better than the well known Elm 327 and you also need less reducer cables.
09-08-2023Questions of mine well answered and the perfect solution
22-08-2022Works fine, but like all new software programs you have to build up habituation for a while.
29-04-2022Works perfectly with multiecuscan
26-04-2022Works perfectly for my Alfa Romeo Giulia
01-04-2022Good to work with multiecuscanner.
15-11-2021Usable software included. Works fine with FORscan
01-09-2021This one works fine. Before this, I ordered another OBD via Bluetooth and an OBD via cable from another company, but they didn't work at all.
26-07-2021Very easy to use and great value for money.
02-02-2021Great interface for et flashe of the ecu. Works smoothly enough for a Saab 9-3v2.
25-01-2021Good to use for basic diagnosis, so you can read and clear fault codes. It is also possible to read some basic sensors. Reading modules etc. is not possible, for that you really need a more advanced scan tool.
17-11-2020Works fine no problem with installation
02-11-2020works well with easy with the downloadable software
07-09-2020Stable connection between obd port and in my case Chinese aftermarket radio. I can live read my hybrid car without data loss.
10-08-2020I ordered it to read and write my Trionic 8 ECU using T8Suite, so far super satisfied with it! The finish is good, the drivers are easy to install and so far the device has not shown any malfunctions. The manufacturer also releases regular firmware updates, so the support is also good.
27-07-2020Easy to install under Windows 10. Works well with OBDWiz.
20-07-2020Works super, software downloaded from the site
30-06-2020Works well and it is easy to use.
29-06-2020Very handy, does what it is supposed to do. Highly recommended
15-06-2020many features and easy operation
08-06-2020Fulfills need perfectly for reasonable amount!
27-03-2020Works well easy install
10-03-2020Inexpensively priced to read the engine ECU. Easy to understand software and thus definitely recommended to just quickly see what is wrong with your car.
09-03-2020good servive, good product, recommended
04-03-2020Good working cable with clear manual
20-01-2020Quick Installation on the computer
14-01-2020no idea still not arrived
08-11-2019Easy to use and quickly downloaded software. Pretty comprehensive info!
21-06-2019This is an original good working product & meets the requirements of the hobbyist.
11-06-2019easy and quick to connect to the pc. OBD wiz is quick and easy to install on PC. just a top product.
17-05-2019Budget friendly solution to read your car
25-02-2019Because this product works as described on the site.
08-01-2019The cable i.c.w. the downloadable program works well. You just have to register your cable/program. The disadvantage is that the computer must have internet connection to activate it. The program works instinctively, so you can easily see where to go to view error codes.
19-11-2018works fine, Daihatsu cuore and BMW e61 from 2006 (xi525), not yet tested all features but can have different software. Nice solution future prepared i.v.m. updating!
15-10-2018Product works together with software excellent
10-10-2018Product works well, just too bad the program is not in Dutch.
09-10-2018Works well, would be even nicer if you could rezet the arbacks.
05-07-2018Order still has not arrived, Lost at DPD.
15-06-2017