Finnish
Polish
Swedish
German
Danish
Foxwell NT530 Plus Ssangyong
The Foxwell NT530 for Ssangyong is a diagnostic tool with professional capabilities. In addition to OBD2 diagnostic features, the NT530 can also read all other systems present in the Ssangyong. Besides diagnostics, the NT530 can perform many service-related tasks such as resetting and setting oil and service intervals, regenerating the particulate filter, learning the throttle body, controlling actuators, clearing adaptation values, learning parts, and more. This Ssangyong diagnostic tool works with both older cars with OBD1 and newer cars with OBD2. Want to know if this device is suitable for your car? Ask us!
✓ EOBD/OBD2 engine management diagnostics
✓ OBD1 diagnostics
✓ Diagnostics of all modules
✓ Live data and Freeze Frame data display
✓ Controlling actuators, resetting adaptation values
✓ Programming and learning parts
✓ Service options: oil/service reset, SAS, DPF filter, EPB, SRS
Foxwell NT530 Ssangyong Diagnostic Tool
The Foxwell NT530 Ssangyong diagnostic tool allows you to read your Ssangyong at a high level. With this device, you are not limited to just diagnosing the engine. The NT530 for Ssangyong goes much further than that. Every system present in your Ssangyong can be read, fault codes can be erased, and live data from sensors can be viewed. The NT530 can be expanded with up to 4 additional modules from other car brands. Thus, the NT530 is also flexibly deployable. Expansion can be done at purchase or later if desired. With this flexible system, you do not need to make a large investment at once; you can upgrade when needed. Many Ssangyong models can be read with the NT530, but not every model. Inquire about the possibilities.
NT530 Ssangyong Functionalities
In addition to the standard OBD2 functionality, the NT530 also has features that until now were only reserved for expensive diagnostic equipment and interfaces. Below is a summary of the capabilities.
- Read generic OBD2 fault codes
- Display live data in almost all modules
- Read Ssangyong-specific fault codes
- Control actuators
- Make adjustments in the car's software
- Program modules in different ECUs
- Support for EPB/SBC
- Learn throttle body
- Reset service interval
- Reset oil interval
- Reset adaptation values
- Regenerate particulate filter
- Adjust headlights
- Calibrate steering angle sensor
- Learn new parts
- Learn replaced parts
- Open and close electronic brake calipers
The following models are supported:
- Korando
- Rexton
- Tivoli
- Musso
- Actyon
- Kyron
- Rodius
Updates
After registering the Foxwell scanner, you will receive lifetime free updates, installable via Wi-Fi on the Foxwell device.
What is included with the Foxwell NT530?
- Foxwell NT530 Plus diagnostic tool
- Nylon storage bag
- 150cm OBD2 cable
- USB cable to connect the device to the PC
- SD card
- Manual
Advantages & drawbacks
- EOBD/OBD2 motormanagement diagnose
- OBD1 diagnose
- Diagnose van alle modules
- Live data en Freeze Frame data weergave
- Programmeren en onderdelen inleren
- Service mogelijkheden: olie/service reset, SAS, roetfilter, EPB, SRS
- Updaten via Wifi
- In de basis enkel geschikt voor Ssangyong voertuigen. Een extra merk kost 110 euro
Often purchased together with...
Specs summary
- Device properties Handheld, Updates, Connect to computer, WIFi connection
- Features ABS, Battery coding, Controlling Actuators, Airbag, Coding, Component testing, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Injector coding, Parts coding, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Programming, Brake pad reset, DPF regeneration, Scantool, Service reset, Immobilizer, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, JDM, JOBD, K-Line, KWP-2000, OBD1, OBD2
Alternative products
UDIAG X-30
