Finnish
Polish
Swedish
German
Danish
Foxwell NT530 Plus Mitsubishi
The Foxwell NT530 for Mitsubishi is a diagnostic device with professional capabilities. In addition to OBD2 diagnostic features, the NT530 can also read all other available systems in the Mitsubishi. Besides diagnosing, the NT530 can perform many service-related actions, such as resetting and setting oil and service intervals, regenerating the particulate filter, learning the throttle body, controlling actuators, clearing adaptive values, learning parts, etc. This Mitsubishi diagnostic device works with both older cars with OBD1 and newer cars with OBD2. Want to know if this device is suitable for your car? Ask us!
✓ EOBD/OBD2 engine management diagnostics
✓ OBD1 diagnostics
✓ Diagnosis of all modules
✓ Live data and Freeze Frame data display
✓ Actuator control, reset adaptive values
✓ Programming and learning parts
✓ Service features: oil/service reset, SAS, particulate filter, EPB, SRS
Foxwell NT530 Mitsubishi Diagnostic Device
The Foxwell NT530 Mitsubishi diagnostic device allows you to read your Mitsubishi at a high level. With this device, you are not limited to just reading the engine. The NT530 for Mitsubishi goes much further than that. Every available system in your Mitsubishi can be read, fault codes can be erased, and live data from sensors can be viewed. The NT530 can be expanded with up to 4 additional modules from other car brands, making it also flexible. The expansion can be done at purchase, or later if desired. With this flexible system, you don't need to make a large investment all at once, you can upgrade as needed. Many Mitsubishi models can be read with the NT530, but not every model. Ask about the possibilities.
NT530 Mitsubishi Features
In addition to standard OBD2 functionality, the NT530 also has features that were previously reserved for expensive diagnostic equipment and interfaces. Below is a summary of the possibilities.
- Read generic OBD2 fault codes
- Display live data in almost all modules
- Read Mitsubishi-specific fault codes
- Control actuators
- Make adjustments to the car's software
- Program modules in various ECUs
- Support for EPB/SBC
- Learn throttle body
- Reset service interval
- Reset oil interval
- Reset adaptive values
- Regenerate particulate filter
- Adjust headlights
- Calibrate steering angle sensor
- Learn new parts
- Learn replaced parts
- Open and close electronic brake calipers
The following models are supported:
- ASX
- COLT
- COLT CABRIOLET
- COLT CZC
- ECLIPSE
- ECLIPSE CROSS
- ECLIPSE SPYDER
- GALANT
- GRANDIS
- L200
- L300
- L300
- LANCER
- LANCER EVOLUTION
- LANCER SPORTBACK
- LANCER WAGON
- MIRAGE
- MONTERO
- OUTLANDER
- OUTLANDER PHEV
- PAJERO (V6#,V7#)
- PAJERO
- PAJERO SPORT
- SPACE STAR
- i-MiEV
Updates
After registering the Foxwell scanner, you will receive free lifetime updates, which can be installed via Wi-Fi on the Foxwell device.
What is included with the Foxwell NT530?
- Foxwell NT530 Plus diagnostic device
- Nylon storage bag
- 150cm OBD2 cable
- USB cable to connect the device to the PC
- SD card
- Manual
Advantages & drawbacks
- EOBD/OBD2 motormanagement diagnosis
- OBD1 diagnosis
- Diagnosis of all modules
- Live data and Freeze Frame data display
- Control actuators, reset adaptation values
- Programming and coding parts
- Service options: oil/service reset, SAS, particulate filter, EPB, SRS
- Can be expanded with 4 more car brands
- Update via Wifi
- Basically only suitable for Mitsubishi vehicles. An additional brand costs 110 euros
Often purchased together with...
Specs summary
- Suitable for car brand Mitsubishi
- Device properties Handheld, Updates, Connect to computer, WIFi connection
- Features ABS, Battery coding, Controlling Actuators, Airbag, Coding, Component testing, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Injector coding, Parts coding, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Programming, Brake pad reset, DPF regeneration, Scantool, Service reset, Immobilizer, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, JDM, JOBD, K-Line, KWP-2000, OBD1, OBD2
Alternative products
UDIAG X-50
