Foxwell NT530 BMW / Mini

The NT530 for BMW and Mini

With this diagnostic tool you are able to read cars that most modern scanners do not yet have support for, such as the modern F and G models from BMW. However, you are not limited to only the brands BMW and Mini. The scan tool is expandable with up to 4 additional modules from different brands/groups. Expanding can be done immediately upon purchase, or later when you need it. With this flexible system, you don't have to make a big investment at once, you can upgrade whenever you want.

Functionalities Foxwell NT530

In addition to the standard OBD2 readout functions, the NT530 also has onboard capabilities previously found only in more expensive diagnostic equipment and interfaces. Below is a list of features of the Foxwell NT530

• Display live data
• Reading generic OBD2 error codes
• Reading out BMW specific error codes
• Reading out Mini specific error codes
• Controlling actuators
  
• Making adjustments to the car software
• Programming modules in different ECUs
• Support for EPB/SBC
• Look for all functionalities at the bottom of the page in the function lists

Applications of the error code reader

A legion of repairs and/or modifications can be performed, which until recently were exclusively reserved for dealers

• Learn throttle body
• Service interval reset
• Reset oil interval
• Reset adaptation values
• Generate particulate filter
• Adjust head
• Calibration of steering angle sensor
• Teach in new parts
• Running in of replaced parts
• Opening and closing of electronic calipers
• See all applications at the bottom of the page in the function lists (downloads)

Updates

After registering the Foxwell scanner, you will receive lifetime free updates. The updates can be installed through the FoxAssist software.