Suomi
Polski
Svenska
Deutsch
Dansk
Foxwell NT530 Plus Aston Martin
The Foxwell NT530 for Aston Martin is a diagnostic device with professional capabilities. In addition to OBD2 diagnostic capabilities, the NT530 can also read all other existing systems in the Aston Martin. Beyond diagnosing, the NT530 can perform many service-related tasks, such as resetting and setting oil and service intervals, regenerating the particulate filter, learning the throttle body, controlling actuators, clearing adaptation values, learning parts, and more. This Aston Martin diagnostic device works on both older cars with OBD1 and new cars with OBD2. Want to know if this device is suitable for your car? Ask us!
✓ EOBD/OBD2 engine management diagnostics
✓ OBD1 diagnostics
✓ Diagnosis of all modules
✓ Live data and Freeze Frame data display
✓ Control actuators, reset adaptation values
✓ Programming and learning parts
✓ Service functions: oil/service reset, SAS, particulate filter, EPB, SRS
Foxwell NT530 Aston Martin Diagnostic Device
The Foxwell NT530 Aston Martin diagnostic device allows you to read your Aston Martin at a high level. With this device, you are not limited to just reading the engine. The NT530 for Aston Martin goes much further than that. It can read every existing system in your Aston Martin, clear fault codes, and view live sensor data. The NT530 can be expanded with up to 4 additional modules from other car brands. This makes the NT530 very flexible. The expansion can be done at the time of purchase or later as needed. With this flexible system, you don't need to make a large investment all at once; you can upgrade as needed. Many Aston Martin models can be read with the NT530, but not all. Ask about the possibilities.
NT530 Aston Martin Features
In addition to standard OBD2 functionality, the NT530 also has functions that were previously reserved for expensive diagnostic equipment and interfaces. Below is a summary of the capabilities.
- Read generic OBD2 fault codes
- Display live data in almost all modules
- Read Aston Martin-specific fault codes
- Control actuators
- Make adjustments in the car's software
- Program modules in various ECUs
- Support for EPB/SBC
- Learn throttle body
- Reset service interval
- Reset oil interval
- Reset adaptation values
- Regenerate particulate filter
- Adjust headlights
- Calibrate steering angle sensor
- Learn new parts
- Learn replaced parts
- Open and close electronic brake calipers
The following models are supported:
- Cygnet (from 2011)
- DB9 (from 2004)
- DBS V12 (from 2007)
- Rapide (from 2009)
- Vantage (from 2005)
- Virage (from 2011)
Updates
After registering the Foxwell scanner, you will receive free lifetime updates, installable via Wifi on the Foxwell device.
What is included with the Foxwell NT530?
- Foxwell NT530 Plus diagnostic device
- Nylon storage bag
- 150cm OBD2 cable
- USB cable to connect the device to the PC
- SD card
- Manual
Advantages & drawbacks
- EOBD/OBD2 motormanagement diagnosis
- OBD1 diagnosis
- Diagnosis of all modules
- Live data and Freeze Frame data display
- Control actuators, reset adaptation values
- Programming and learning parts
- Service options: oil/service reset, SAS, particulate filter, EPB, SRS
- Can be expanded with 4 more car brands
- Updaten via Wifi
- Basically only suitable for Aston Martin vehicles. An additional brand costs 110 euros
Often purchased together with...
Specs summary
- Suitable for car brand Aston Martin
- Device properties Handheld, Updates, Connect to computer, WIFi connection
- Features ABS, Battery coding, Controlling Actuators, Airbag, Coding, Component testing, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Injector coding, Parts coding, Interface, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Programming, Brake pad reset, DPF regeneration, Scantool, Service reset, Immobilizer, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, K-Line, KWP-2000, OBD1, OBD2