Suomi
Polski
Svenska
Deutsch
Dansk
Foxwell NT530 Plus Subaru
The Foxwell NT530 for Subaru is a diagnostic tool with professional capabilities. In addition to OBD2 diagnostic functions, the NT530 can also read all other available systems in the Subaru. Besides diagnosing, the NT530 can perform many service-related tasks, such as resetting and configuring oil and service intervals, regenerating the DPF, learning the throttle body, controlling actuators, clearing adaptive values, learning parts, etc. This Subaru diagnostic tool works on both older cars with OBD1 and newer cars with OBD2. Want to know if this device is suitable for your car? Ask us!
✓ EOBD/OBD2 engine management diagnostics
✓ OBD1 diagnostics
✓ Diagnostics of all modules
✓ Live data and Freeze Frame data display
✓ Actuator control, resetting adaptive values
✓ Programming and teach in parts
✓ Service functions: oil/service reset, SAS, DPF, EPB, SRS
Foxwell NT530 Subaru diagnostic device
The Foxwell NT530 Subaru diagnostic device allows you to read your Subaru at a high level. You are not limited to just reading the engine with this device. The NT530 for Subaru goes much further than that. Every available system in your Subaru can be read, fault codes can be erased, and live sensor data can be viewed. The NT530 can be expanded with up to 4 extra modules from other car brands. This makes the NT530 very versatile. The expansion can be done at purchase or later when desired. With this flexible system, you don't have to make a large investment all at once; you can upgrade as needed. Many Subaru models can be read with the NT530, but not all. Ask about the possibilities.
NT530 Subaru functionalities
In addition to the standard OBD2 functionality, the NT530 also has features that were previously only available in expensive diagnostic equipment and interfaces. Below is a summary of the possibilities.
- Reading generic OBD2 fault codes
- Displaying live data in almost all modules
- Reading Subaru-specific fault codes
- Controlling actuators
- Making adjustments in the car's software
- Programming modules in different ECUs
- Support for EPB/SBC
- Learning the throttle body
- Resetting service intervals
- Resetting oil intervals
- Resetting adaptive values
- Regenerating the particulate filter
- Adjusting headlights
- Calibrating the steering angle sensor
- Learning new parts
- Learning replaced parts
- Opening and closing electronic brake calipers
The following models are supported:
- BRZ
- Forester
- Impreza
- Legacy
- Levorg
- Outback
- Tribeca
- WRX
- WRX STI
- XV Crosstrek
- Justy
- Exiga
- Legacy Outback
Updates
After registering the Foxwell scanner, you will receive free lifetime updates, installable via WiFi on the Foxwell device.
What is included with the Foxwell NT530?
- Foxwell NT530 Plus diagnostic device
- Nylon storage case
- 150cm OBD2 cable
- USB cable to connect the device to the PC
- SD card
- Manual
Advantages & drawbacks
- EOBD/OBD2 engine management diagnosis
- OBD1 diagnosis
- Diagnosis of all modules
- Live data and Freeze Frame data display
- Programming and coding parts
- Service options: oil/service reset, SAS, particulate filter, EPB, SRS
- Update via Wifi
- Basically only suitable for Subaru vehicles. An additional brand costs 110 euros
Often purchased together with...
Specs summary
- Suitable for car brand Subaru
- Device properties Handheld, Updates, Connect to computer, WIFi connection
- Features ABS, Battery coding, Controlling Actuators, Airbag, Coding, Component testing, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Injector coding, Parts coding, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Programming, Brake pad reset, DPF regeneration, Scantool, Service reset, Immobilizer, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, JDM, JOBD, K-Line, KWP-2000, OBD1, OBD2
Alternative products
UDIAG X-30
