Finnish
Polish
Swedish
German
Danish
Foxwell NT530 Renault
The Foxwell NT530 for Renault is a diagnostic device with professional capabilities. In addition to OBD2 diagnostic capabilities, the NT530 can also read all other existing systems in the Renault. Beyond diagnosing, the NT530 can perform many service-related tasks, such as resetting and setting oil and service intervals, regenerating the particulate filter, learning the throttle body, controlling actuators, clearing adaptation values, learning parts, and more. This Renault diagnostic device works on both older cars with OBD1 and new cars with OBD2. Want to know if this device is suitable for your car? Ask us!
✓ EOBD/OBD2 engine management diagnostics
✓ OBD1 diagnostics
✓ Diagnosis of all modules
✓ Live data and Freeze Frame data display
✓ Control actuators, reset adaptation values
✓ Programming and learning parts
✓ Service functions: oil/service reset, SAS, particulate filter, EPB, SRS
Foxwell NT530 Renault Diagnostic Device
The Foxwell NT530 Renault diagnostic device allows you to read your Renault at a high level. With this device, you are not limited to just reading the engine. The NT530 for Renault goes much further than that. It can read every existing system in your Renault, clear fault codes, and view live sensor data. The NT530 can be expanded with up to 4 additional modules from other car brands. This makes the NT530 very flexible. The expansion can be done at the time of purchase or later as needed. With this flexible system, you don't need to make a large investment all at once; you can upgrade as needed. Many Renault models can be read with the NT530, but not all. Ask about the possibilities.
NT530 Renault Features
In addition to standard OBD2 functionality, the NT530 also has functions that were previously reserved for expensive diagnostic equipment and interfaces. Below is a summary of the capabilities.
- Read generic OBD2 fault codes
- Display live data in almost all modules
- Read Renault-specific fault codes
- Control actuators
- Make adjustments in the car's software
- Program modules in various ECUs
- Support for EPB/SBC
- Learn throttle body
- Reset service interval
- Reset oil interval
- Reset adaptation values
- Regenerate particulate filter
- Adjust headlights
- Calibrate steering angle sensor
- Learn new parts
- Learn replaced parts
- Open and close electronic brake calipers
The following models are supported:
- ARKANA
- ALASKAN
- ALPINE A110
- AVANTIME
- CLIO 2
- CLIOIIp2/3/4
- CLIO II Ph 6
- CLIO III
- CLIO IV
- CLIO V
- CLIO V6
- CLIO V6 ph 2
- CAPTUR II
- DUSTER
- DUSTER ph2
- DUSTER ph3
- DOKKER/KANGOO
- ESPACE
- ESPACE IV
- ESPACEIV ph2/3/4
- ESPACE V
- ESPACE V ph2
- KANGOO
- KANGOO II
- KANGOO MUX
- KANGOO VLL
- KANGOO ZE/StopStart/ph2
- EXPRESS II
- KOLEOS/QM5
- KOLEOS II/QM6
- KADJAR
- LOGAN
- LODGY
- LOGAN II/SANDERO II
- LAGUNA
- LAGUNA II
- LAGUNA phase 2
- LAGUNAII ph2
- LAGUNA III
- MODUS
- MASTER
- MASTER III
- MASTER RWD
- MASTER ph 2
- MAST RWD ph2
- MAST RWD ph3
- MASTER ph 3
- MASTER III ETECH BT4 EOBD
- MASTER III ETECH BT4 BAT
- MEGANE/SCEN.
- NEW SM3/FLUENCE/MEGANE
- MEGANE II
- MEGANEIII/SCENICIII
- MEGANE IV
- MEGANE IV ph2
- MEGANE IV SEDAN
- MEGANE IV SEDAN ph2
- TWIZY
- TWINGO II
- TWINGO III
- TWINGO phase 2
- TRAFIC II
- TRAFICIIp2/3
- TRAFIC III
- THALIA/SYMBL
- THALIA/SYMB.2
- TALISMAN/SM6
- TALISMAN/SM6 ph2
- SCENIC II
- SCENIC IV
- SANDERO
- SANDERO/LOGAN III FAMILY
- VEL SATIS
- VELSATIS ph2
- WIND
- ZOE
- NEW ZOE
- CLIO II B2
- MASTER B2
- MASTER Ph2 B2
- MAST.PRO.ph2 B2
- MASTER PROP. B2
- KANGOO B2
- KANGOO MUX B2
- TRAFIC II B2
- AVANTIME B2
- CLIO V6 B2
- CLIO V6 Ph2 B2
- CLIOIIp2/3/4 B2
- LAGUNA Ph2 B2
- MEGANE/SCEN. B2
- THALIA/SYMBOL B2
- TRAFIC B2
- TWINGO B2
- TWINGO Ph2 B2
Updates
After registering the Foxwell scanner, you will receive free lifetime updates, installable via Foxwell software.
What is included with the Foxwell NT530?
- Foxwell NT530 diagnostic device
- Nylon storage bag
- 150cm OBD2 cable
- USB cable to update the device via the PC
- SD card
- Manual
Advantages & drawbacks
- EOBD/OBD2 motormanagement diagnosis
- OBD1 diagnosis
- Diagnosis of all modules
- Live data and Freeze Frame data display
- Control actuators, reset adaptation values
- Programming and learning parts
- Service options: oil/service reset, SAS, particulate filter, EPB, SRS
- Can be expanded with 4 more car brands
- Basically only suitable for Maserati vehicles. An additional brand costs 110 euros
Often purchased together with...
Specs summary
- Suitable for car brand Dacia, Renault
- Device properties Handheld, Updates, Connect to computer
- Features ABS, Battery coding, Controlling Actuators, Airbag, Coding, Component testing, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Injector coding, Parts coding, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Programming, Brake pad reset, DPF regeneration, Scantool, Service reset, Immobilizer, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, K-Line, KWP-2000, OBD1, OBD2
