Foxwell NT530 Fiat / Alfa Romeo / Abarth / Lancia

Foxwell NT530 Fiat / Alfa Romeo / Abarth / Lancia

With this OBD2 scan tool you can read Italian vehicles at a high level. However, you are not limited to only Fiat, Lancia, Abarth and Alfa Romeo. The scan tool is expandable with up to 4 additional modules from other car brands. Expanding can be done at the time of purchase, or later when desired. With this flexible system, you don't have to make a large investment at once, so you can upgrade when the need arises.

NT530 functionalities

In addition to standard OBD functionality, the NT530 also has features on board that until now were reserved only for expensive diagnostic equipment and interfaces

• Display live data
• Reading generic OBD2 error codes
• Reading Fiat specific error codes
• Reading out Alfa Romeo specific error codes
• Reading out Abarth specific error codes
• Reading Lancia specific error codes
• Controlling actuators
• Making adjustments to the car software
• Programming modules in different ECUs
• Support for EPB/SBC
• Look for all functionalities at the bottom of the page in the function lists

Applications of the scan tool

Specifically, many different repairs and/or adjustments can be made which again, until recently, were reserved for dealer equipment

• Learn throttle body
• Service interval reset
• Reset oil interval
• Reset adaptation values
• Generate particulate filter
• Adjust headlights
• Calibration of steering angle sensor
• Teach in new parts
• Running in of replaced parts
• Opening and closing of electronic calipers
• FCA SGW 12+8 security gateway module (SGW) cable may be required for use on Fiat models that are secure and cannot be accessed via the normal OBD2 way. The Fiat Chrysler group introduced this method as of model year 2016. The FCA cable is a so-called bypass cable.
• Look for all applications at the bottom of the page in the feature lists (downloads)