Toyota 17 Pin OBD - 16 Pin OBD2 Adapter

What is the 17 pin Toyota OBD1 adapter cable for?

This Toyota adapter cable turns an OBD1 connector into an OBD2 connector. To read out your Toyota with OBD1 connector you will need a reader that can read out OBD1. Suitable equipment for older Toyotas with a 17 pin OBD1 connector can be found at the bottom of the page under products 'related'. Please note that there are 2 types of adapter cables with 17 pin connection. We can supply both.

What models is the cable suitable for?

• Toyota 4Runner 1990-1995
• Toyota Avalon 1995-1995
• Toyota Camry 1990-1995
• Toyota Celica 1990-1995
• Toyota Corolla 1990-1995
• Toyota Cressida 1990-1992
• Toyota Land Cruiser 1990-1995
• Toyota MR2 1991-1995
• Toyota Paseo 1992-1995
• Toyota Pickup 1990-1995
• Toyota Pevia 1991-1995
• Toyota Supra 1990-1995
• Toyota T100 1993-1995
• Toyota Tacoma 1995-1995
• Toyota Tercel 1990-1995

Specifications of the Toyota OBD1 to OBD2 adapter cable

• Connector: 17 pin OBD1 connector to standard 16 pin OBD2 connector, specifically for older Toyotas before 2001 model year
• Cable length: 28cm
• Only suitable for Toyota's with OBD1. The monitor you connect must also work with OBD1.
• Made of strong materials and therefore suitable for intensive use.

What do you get delivered?

• Toyota 17 pin OBD1 to 16 pin OBD2 adapter cable to connect a diagnostic device to a Toyota with OBD1.

Why buy a Toyota 17 pin adapter cable?

If you own an older Toyota, before 2001, your Toyota has a 17 pin OBD1 connection under the hood. To read out your Toyota, you need this Toyota cable and a reader that can handle the older Toyota OBD1 protocol. Through the 17 pin connection in the engine compartment, with a suitable reader, you can read out most systems in your Toyota.