Suomi
Polski
Svenska
Deutsch
Dansk
Foxwell NT530 Plus Peugeot / Citroën
The Foxwell NT530 for Peugeot/Citroën is a diagnostic device with professional capabilities. In addition to OBD2 diagnostic capabilities, the NT530 can also read all other existing systems in the Peugeot/Citroën. Besides diagnosing, the NT530 can perform many service-related tasks, such as resetting and setting oil and service intervals, regenerating the diesel particulate filter, learning the throttle body, controlling actuators, clearing adaptation values, learning parts, etc. This Peugeot/Citroën diagnostic device works on both older cars with OBD1 and new cars with OBD2. Do you want to know if this device is suitable for your car? Ask us!
✓ EOBD/OBD2 engine management diagnosis
✓ OBD1 diagnosis
✓ Diagnosis of all modules
✓ Live data and Freeze Frame data display
✓ Control actuators, reset adaptation values
✓ Programming and learning parts
✓ Service capabilities: oil/service reset, SAS, diesel particulate filter, EPB, SRS
Foxwell NT530 Citroën/Peugeot Diagnostic Device
The Foxwell NT530 Citroën/Peugeot diagnostic device allows you to read your Citroën/Peugeot at a high level. With this device, you are not limited to just reading the engine. The NT530 for Citroën/Peugeot goes much further than that. It can read every existing system in your Citroën/Peugeot, clear fault codes, and display live data from sensors. The NT530 can be expanded with up to 4 extra modules from other car brands, making it highly versatile. This expansion can be done at the time of purchase or later as needed. With this flexible system, you don't have to make a large investment all at once; you can upgrade as needed. Many Citroën/Peugeot models can be read with the NT530, but not all. Inquire about the possibilities.
NT530 Citroën/Peugeot Features
In addition to the standard OBD2 functionality, the NT530 also includes features that were previously reserved for expensive diagnostic equipment and interfaces. Below is a summary of the capabilities.
- Read generic OBD2 fault codes
- Display live data in almost all modules
- Read Citroën/Peugeot-specific fault codes
- Control actuators
- Make adjustments to the car's software
- Program modules in various ECUs
- Support for EPB/SBC
- Learn throttle body
- Reset service intervals
- Reset oil intervals
- Reset adaptation values
- Regenerate diesel particulate filter
- Adjust headlights
- Calibrate steering angle sensor
- Learn new parts
- Learn replaced parts
- Open and close electronic brake calipers
The following models are supported:
- BERLINGO
- BERLINGO (B9)
- BERLINGO (K9)
- BERLINGO 2
- BERLINGO 2 (M69)
- BERLINGO Electric (B9e)
- C1
- C2
- C3
- C3 Aircross
- C3 PICASSO
- C3 PLURIEL
- C4
- C4 Aircross
- C4 CACTUS
- C4 PICASSO
- C4 SPACETOURER
- C5
- C5 Aircross
- C5 X
- C6
- C8
- C-CROSSER
- C-ELYSEE
- Citroen C4 X
- C-ZERO
- DS 3
- DS 4
- DS 5
- DS 5 Hybrid4
- ELYSEE
- EVASION
- JUMPER
- JUMPER 2
- JUMPER 3
- JUMPER 3 Euro 5 / Euro 6
- JUMPER 3 Minibus
- JUMPY
- JUMPY 2
- JUMPY 3
- NEMO
- SAXO
- SPACETOURER
- XANTIA
- XANTIA 2
- XM
- XSARA
- XSARA 2
- XSARA PICASSO
ZX
- 1007
- 107
- 108
- 2008
- 206
- 206+
- 207
- 207+
- 208
- 3008
- 3008 HYbrid4
- 301
- 306
- 307
- 308
- 308 (P5)
- 308 (T9)
- 4007
- 4008
- 406
- 406 coupe
- 407
- 408
- 5008
- 5008 (P87)
- 508
- 508 (R8)
- 508 HYbrid4
- 508 RXH
- 508 RXH HYbrid4
- 607
- 806
- 807
- BIPPER
- BOXER
- BOXER 2
- BOXER 3
- BOXER 3 Euro 5 / Euro 6
- BOXER 3 Minibus
- EXPERT
- EXPERT 2
- EXPERT 3
- iON
- PARTNER
- PARTNER (B9)
- PARTNER 2
- PARTNER 2 (M69)
- PARTNER Electric (B9e)
- RCZ
- RIFTER (K9) PARTNER (K9)
- TRAVELLER
Updates
After registering the Foxwell scanner, you will receive free lifetime updates, which can be installed via Wifi on the Foxwell device.
What is included with the Foxwell NT530?
- Foxwell NT530 Plus diagnostic device
- Nylon storage bag
- 150cm OBD2 cable
- USB cable to connect the device to the PC
- SD card
- User manual
Advantages & drawbacks
- EOBD/OBD2 motormanagement diagnosis
- OBD1 diagnosis
- Diagnosis of all modules
- Live data and Freeze Frame data display
- Control actuators, reset adaptation values
- Programming and coding parts
- Service options: oil/service reset, SAS, particulate filter, EPB, SRS
- Can be expanded with 4 more car brands
- Update via Wifi
- Basically only suitable for Peugeot and Citroën vehicles. An additional brand costs 110 euros
Often purchased together with...
Specs summary
- Suitable for car brand Citroën, Peugeot
- Device properties Handheld, Updates, Connect to computer, WIFi connection
- Features ABS, Battery coding, Controlling Actuators, Airbag, Coding, Component testing, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Injector coding, Parts coding, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Programming, Brake pad reset, DPF regeneration, Scantool, Service reset, Immobilizer, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, JDM, JOBD, K-Line, KWP-2000, OBD1, OBD2
Alternative products
UDIAG X-50
