Finnish
Polish
Swedish
German
Danish
Foxwell NT530 Mazda
The Foxwell NT530 Mazda is a scan tool with professional capabilities, at a normal price. The NT530 is equipped with the normal OBD2 diagnostic capabilities, along with the ability to read all other modules. Besides reading, the NT530 can perform many service related operations, such as resetting and setting oil and service intervals, regenerating particulate filter, learning throttle body, controlling actuators, erasing adaptation values, learning parts etc etc. This reader works on both older cars with OBD1 and the new cars with OBD2. Want to know if this device is suitable for your car? Check the Mazda feature list at the bottom of the page. It is possible that the newest Mazda models are not yet supported.
✓ EOBD/OBD2 engine management diagnosis
✓ OBD1 diagnosis
✓ Diagnosis of all modules
✓ Live data and Freeze Frame data display
✓ Controlling actuators, resetting adaptation values
✓ Programming and teaching components
✓ Service capabilities: oil/service reset, SAS, particulate filter, EPB, SRS
Foxwell NT530 for Mazda
The Foxwell NT530 with professional Mazda diagnostic software, allows you to read and possibly reset your car at a high level. However, you are not limited to just the Mazda brand. The NT530 is expandable with up to 4 additional modules from other brands. Expanding can be done at the time of purchase, or later when desired. With this flexible system, you don't have to make a large investment all at once, so you can upgrade when the need arises. Many Mazda models can be read with the NT530, but not every model. To be sure that the Mazda can be read with this device, please refer to the function list at the bottom of the page. This describes exactly which module of which model can be accessed.
Functionalities NT530 Mazda
In addition to the standard OBD2 functionality, the NT530 also has features on board that until now were reserved only for expensive diagnostic equipment and interfaces. Below is a summary of the capabilities.
- Reading generic OBD2 error codes
- Display live data in almost all modules
- Read out Mazda specific error codes
- Controlling actuators
- Making adjustments to the car software
- Programming of modules in different ECUs
- Support for EPB/SBC
- Learn throttle body
- Service interval reset
- Reset oil interval
- Reset adaptation values
- Generate particulate filter
- Adjust headlights
- Calibration of steering angle sensor
- Teach in new parts
- Teaching of replaced parts
- Opening and closing of electronic calipers
View and download job list
In the Mazda function list (PDF) you will find all Mazda models and modules that can be read with the NT530. At the bottom of the file you will also find the special operations the device can perform on certain models. Before ordering the device, we recommend you to check carefully if the features you want are present.
Advantages & drawbacks
- EOBD/OBD2 engine management diagnosis
- OBD1 diagnosis
- Diagnosis of all modules
- Live data and Freeze Frame data display
- Controlling actuators, resetting adaptation values
- Programming and teaching parts
- Service capabilities: oil/service reset, SAS, particulate filter, EPB, SRS
- Only suitable for Mazda vehicles
- Windows computer or laptop required to install the software on the tester
Often purchased together with...
Specs summary
- Suitable for car brand Mazda
- Device properties Free updates, Handheld, Updates
- Features ABS, Controlling Actuators, Airbag, Operate electronic parking brake, Erase fault codes, Freeze frame, Teach in throttle valve, Lambda probe / o2 sensors, Live data, Engine diagnostics, Engine management reset, Oil reset, Brake pad reset, DPF regeneration, Scantool, Service reset, Calibrate steering angle sensor, Transmission
- Protocol CAN, EOBD, ISO 9141, J1850 PWM, J1850 VPW, K-Line, KWP-2000, OBD1, OBD2
Alternative products
