Foxwell NT530 Volvo

Foxwell NT530 for Volvo

The Foxwell NT530 with professional Volvo diagnostic software, allows you to read and possibly reset the car at a high level. However, you are not limited to just the Volvo brand. The NT530 is expandable with up to 4 additional modules from other brands. Expanding can be done at the time of purchase, or later when desired. With this flexible system, you do not have to make a large investment all at once, so you can upgrade when the need arises. Many Volvo models can be read with the NT530, but not every model. To make sure your Volvo can be read with this device, please refer to the function list at the bottom of the page. It describes exactly which module of which model can be accessed.

Functionalities NT530 Volvo

In addition to the standard OBD2 functionality, the NT530 also has features on board that until now were reserved only for expensive diagnostic equipment and interfaces. Below is a summary of the capabilities.

• Reading generic OBD2 error codes
• Display live data in almost all modules
• Reading Volvo specific error codes
• Controlling actuators
• Making adjustments to the car software
• Programming modules in different ECUs
• Support for EPB/SBC
• Learn throttle body
• Service interval reset
• Reset oil interval
• Reset adaptation values
• Generate particulate filter
• Adjust headlights
• Calibration of steering angle sensor
• Teach-in of new parts
• Teach-in of replaced parts
• Opening and closing of electronic calipers

View and download function list for Volvo

In the Volvo function list (PDF) you will find all Volvo models and modules that can be read with the NT530. At the bottom of the file you will also find the special operations the device can perform on certain models. Before ordering the device, we recommend you to check carefully if the features you want are present.