10 Feedback Company
from 44 reviews

OBD2 Extension Cable Angle 16 pins 30cm

The 30cm extension cable can be used on a standard OBD2 connector to extend the cable at your diagnostic device. If the OBD connector obstructs while driving, the extension cable can be used to move it to a different location for better accessibility. If you use a wireless readout device and the bluetooth or wifi signal is not strong enough because the connector is too far under the steering wheel? Then this extension cable is the ideal solution!

Read more
Incl. Tax
Order before 17:00 = next-day delivery
This product is in stock
Incl. Tax
I DealPay PalKlarnaBankoverschrijvingBancontactBelfiusKBC CBCAmerican ExpressVisaMaestro lightMaster Card lightSofortGiropayPrzelewy24
OBD2 Extension Cable Angle 16 pins 30cm
10 Feedback Company
from 44 reviews
Got a question about this product?

Our team is ready to answer all your questions.

FAQ Contact us

OBD2 extension cable 30cm

When your OBD2 connection in your car is not easily accessible, your cable from your diagnostic equipment is not long enough, or your signal from your wireless readout device is not good, you can use a 30cm extension cable to extend OBD connection to the right place for you. In this way, you can work more pleasantly with your diagnostic equipment. The plug that plugs into the car is wired on the side, so it can be placed in narrower spaces as well.

Some cars from the PSA group (Citroën and Peugeot) are known for poor diagnostic connectors, where the space in the port is too wide. As a result, no, or poor contact is made with the diagnostic equipment. The 30cm extension cable offers a solution here. The plug of the extension cable is a bit larger than the plug on a diagnostic device. So you can be sure that the connection is good.

What are the specifications of the OBD extension cable?

    • Type: OBD2 male to female
    • Plug: angle (special for small spaces) 16 pin to 16 pin (standard OBD2 connector)
    • Cable length: 30 cm
    • Robust materials, also suitable for intensive use

What do you get delivered?

    • You will receive a 30cm extension cable with 1 connector angled, suitable for an OBD2 connection, delivered by parcel post.

Why buy a 30cm OBD2 extension cable with a corner plug?

  • When your diagnostic port in your car is hard to reach, the cable from your diagnostic device is too short, or because the connection from your wireless diagnostic equipment is poor, this extension cable offers more flexibility, better accessibility and reliability. Because 1 plug is wired on the side, this plug also fits in diagnostic ports placed in tight spaces.
Advantages & drawbacks
  • Useful for turning a bad OBD connection into a good one, such as on older Audi, Peugeot and Citroën models
  • The cable is short so it does not hang in the way easily
  • The location of the OBD connector can be moved with this cable, making it easier to access
  • The plug inserted into OBD socket of the car has a cable on the side of plug. Thus, the plug needs very little space.
  • Stiff cable and therefore sometimes difficult to eliminate
  • May be just a little too short for some purposes
Often purchased together with...
OBD Link LX Bluetooth

OBDLink LX Bluetooth Interface

Obdlink mx bluetooth ios

OBDLink MX+ Bluetooth Interface iOS&Android

€149.00 Retail price €159.00
Specs summary
  • Features Extension cable
Alternative products
Obd2 verlengkabel recht 16 pins 100cm

OBD2 Extension Cable Straight 16 pin 100cm

Low profile platte obd2 verlengkabel

OBD-2 Extension Cable Flat 16 pins 60cm

Review by Evert
See first commentaa...

See first comment so check back!

Review by anonymous
The product does what...

The product does what it is supposed to do and that is enough

Review by anonymous
handy for tricky ...

useful for awkward positions for semi-permanent installation

Review by anonymous
Great product and kwa...

Great product and quality.